Jennys' Tanks & Things
Would you like to react to this message? Create an account in a few clicks or log in to continue.

Griffon 75mm GMC Gun Shield

5 posters

Go down

Griffon 75mm GMC Gun Shield Empty Griffon 75mm GMC Gun Shield

Post  Guest Sat Aug 29, 2009 6:05 am

The 75mm GMC (Gun Motor Carriage) was developed based on the M3 Halftrack and the need for a mobile Anti Tank platform. The 75mmGMC served in North Africa and Italy before being phased out and replaced with dedicated Anti Tank weapons such as the M10. More than 800 made it into service with the rest being refitted to the original M3 troop carrier roles. But history you can find at the same places I found this, let's talk PE!

Griffon 75mm GMC Gun Shield Gmcgs01

Standard packaging for Armor PE from Griffon, sturdy cardboard protects the PE from folds and mishandling.

Griffon 75mm GMC Gun Shield Gmcgs02a
Fret A shows the Armor plate and framework. Initial look does not show much folding other than the frame. This is a small build in comparison to other offerings in PE Halftrack so please follow me in the build and fold and glue and maybe even some soldering, watch the fingers!

Griffon 75mm GMC Gun Shield Gmcgs03
Fret E (there are no other Frets, these frets no doubt are included in the Griffon Royal Edition)

Griffon 75mm GMC Gun Shield Gmcgs04
The original part that the Griffon PE is replacing. Nice slide molded Gun shield from Dragon, and in one piece . Very thin and nicely detailed. The PE will have to build up special to beat the detail that is coming out of the box from Dragon.

Griffon 75mm GMC Gun Shield Gmcgs05

Griffon 75mm GMC Gun Shield Gmcgs06

Griffon's frets are well made but not hard to separate the parts from the fret. Slight pressure on the tab with a sharp hobby knife and it's pops. I have dealt with others that nearly called for a dremal to cut it away from the fret. Not the case with this Griffon product.

Griffon 75mm GMC Gun Shield Gmcgs07

This is right hand side frame to build the shield on. I annealed with heat first to test how the Griffon PE takes the heat and to make sure the folds will be pliable. Turned out I did not need the Hold and Fold as the angles were too complicated for this and the smooth mouth pliers worked fine here. Use a small metal file to file down any leftover tabs from separating the part from the fret.

Griffon 75mm GMC Gun Shield Gmcgs08

Test fitting the frames against the kit part to check the angles, looks good.

Griffon 75mm GMC Gun Shield Gmcgs09

Now you can use CA as your bonding agent, should work fine, remember to score the surface on both sides of the brass before gluing, give the CA a little something more to grip. I like to solder PE parts of this size using solder past and my trusty microtorch. Alcohol bath before soldering with solder paste, clamps use to hold part in place. Apply heat and watch those finger tips!

Griffon 75mm GMC Gun Shield Gmcgs10

And the result.

Griffon 75mm GMC Gun Shield Gmcgs11

A little cleaning with the wire brush and there you go. Be sure to clean as you go because it's far easier to do that than when the build is nearly complete.

Griffon 75mm GMC Gun Shield Gmcgs12

Turned out nicely if I say so myself. Griffon brass is sturdy and takes solder with no problem. Some manufactures coat their metal (not always brass) with an agent that makes soldering nearly impossible without striping all of the coating and cleaning the part. The weight and thickness of the Griffon parts feels good in your fingers as you are working with them. I found that annealing was not necessary with the rest of the folds as the scoring for the fold lines were etched just enough to make the bend and fold clean and easy with just my smooth mouth pliers and finger pressure. The thickness of the armor feels and looks more to scale than the plastic kit part.

Griffon 75mm GMC Gun Shield Gmcgs13

The forward right side of the Gun Shield and moving on...

Griffon 75mm GMC Gun Shield Gmcgs14

Finished product. The kit has some more bolt, rivet and bracket detail will be added but you can see the overall result is a well produced replacement for the Dragon Gun Shield.

Griffon 75mm GMC Gun Shield Gmcgs16
Griffon 75mm GMC Gun Shield Gmcgs17

Notice how much more pronounced and well define the screw head detail is with the Griffon PE when compared to the original kit part. This will be really pronounced when you paint and highlight the details on your kit.

Griffon 75mm GMC Gun Shield Gmcgs18

The Finely turned 75mm barrel does not come in this kit, that is a future review is coming up shortly. What is included in the kit is the two frets of parts and one .5mm * 5 mm plastic rod for making a quick release lock on part of the gun mount. Also there are replacements for some other parts not directly connected to the gun shield but attaches to the gun mount itself. Behind the shield will be the mount for the telescopic sighting system.

Conclusion, I found the Griffon 75mm Gun Shield a great little addition to the 75mm GMC. Over all it took about 1.5 hour total to complete this build and I believe you will find that it would be time well spent for the detail added to your 75mm GMC. Using CA would cut that time down I am sure. I would recommend this to anyone who wants to add that something special to the 75mm GMC, a subject that is not often seen modeled till now.

I would like to thank Griffon Models for this great review sample. Thanks to Jenny and crew for the encouragement and guidance for my first review. Now let's go build a Half Track!


Back to top Go down

Griffon 75mm GMC Gun Shield Empty Re: Griffon 75mm GMC Gun Shield

Post  Jenny Ryan Sat Aug 29, 2009 6:31 am

A comprehensive review Bob Very Happy , It looks to be a significant improvement over the kit part & a worthwhile upgrade Very Happy .

Jenny flower
Jenny Ryan
Jenny Ryan
Supreme commander
Supreme commander

Posts : 6599
Join date : 2008-11-17
Location Location : NSW Australia

Back to top Go down

Griffon 75mm GMC Gun Shield Empty Re: Griffon 75mm GMC Gun Shield

Post  Kreighshoer Sat Aug 29, 2009 8:18 am

super review bob! thanks for that! Very Happy
Platoon Commander
Platoon Commander

Posts : 2962
Join date : 2008-11-19
Age : 51

Back to top Go down

Griffon 75mm GMC Gun Shield Empty Nice review

Post  grumpyoldman Sat Aug 29, 2009 8:41 am

Just may need to pick up this set.
(just the gun shield, as I'm not up to the PE parts in the "royal set"
Far too many tiny parts, far too little time, and far to hard to see.

Last edited by grumpyoldman on Sat Aug 29, 2009 5:22 pm; edited 1 time in total
seasoned veteran
seasoned veteran

Posts : 113
Join date : 2008-11-18
Age : 71
Location Location : New Jersey---- U.S.of A.

Back to top Go down

Griffon 75mm GMC Gun Shield Empty Re: Griffon 75mm GMC Gun Shield

Post  László Harsányi Sat Aug 29, 2009 10:57 am

Great review, after the M2 I'm not surprised that you couldn't resist this offer from Griffon.
I had voted against this set because I felt that the Dragon shield is well detailed for me and somewhere I had to draw a limit to my spendings Crying or Very sad . Unfortunately when I ordered my sets (the ammo and the general one), the barrel was available just in their Royal Edition. Now they sell it in a cheaper configuration too, so if somebody feels the urge to get one of this kit and PE - wich I'm sure will be if you continue these extendend reviews - check Griffon's product list thoroughly.
László Harsányi
László Harsányi
seasoned veteran
seasoned veteran

Posts : 117
Join date : 2009-05-26
Age : 61
Location Location : Budapest

Back to top Go down

Griffon 75mm GMC Gun Shield Empty Re: Griffon 75mm GMC Gun Shield

Post  Guest Sat Aug 29, 2009 3:17 pm

László, sorry you missed out on the 75mm barrel. Griffon Models website has the barrel listed in their Premium Edition and the Royal set. The review sample I have that's coming up has it listed as a Bonus part, I suppose it was an afterthough to add the barrel. You are right, one needs to check the content of these kits closely to make sure you get what you want.

You are also right that the kit part is very well made, I took note of how thin the kit part is, that being said, the Griffon Gun Shield is more thin and closer to scale I would think because the armor thickness was only .625 inches. Makes one wonder exactly what that armor was going to stop... affraid

Thanks for the comment folks! You'll see this shield later on all finished out.


Back to top Go down

Griffon 75mm GMC Gun Shield Empty Re: Griffon 75mm GMC Gun Shield

Post  G Cooper Mon Aug 31, 2009 10:03 pm

Great review Moon Puppy. It looks quick and easy and a real improvment over the already nice kit parts. It makes me think about Noel's upcoming sunny " Duel in the Sun " sunny group build. It would be perfect for that Very Happy .

Gary Cool

BBQ Master Extraordinaire .
Honest; It was on fire when I got here !

Like a Star @ heaven
G Cooper
G Cooper
naughty corner commissar
naughty corner commissar

Posts : 3027
Join date : 2009-01-16
Age : 109
Location Location : Yuma, Az.

Back to top Go down

Griffon 75mm GMC Gun Shield Empty Re: Griffon 75mm GMC Gun Shield

Post  Sponsored content

Sponsored content

Back to top Go down

Back to top

Permissions in this forum:
You cannot reply to topics in this forum